CFHZZ - XYRON 224

  • MSDS: CFHZZ
  • Manufacturer: EUTECTIC CORP
  • Product Name: XYRON 224
  • National Stock Number: 3439-00-943-0231
Product Identification

Product ID:XYRON 224
MSDS Date:03/31/1993
FSC:3439
NIIN:00-943-0231
MSDS Number: CFHZZ

Responsible Party
EUTECTIC CORP
40-40 172ND STREET
FLUSHING, NY 11358-2799
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

Contractor
EUTECTIC CORP
CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

Ingredients

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: >50%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


POTASSIUM SILICATE

CAS: 1312-76-1

OSHA PEL N/K

ACGIH TLV: N/K


BARIUM CARBONATE

CAS: 513-77-9

RTECS: CQ8600000

Fraction By Weight: 1-5%

OSHA PEL 5 MG/M3 (BA)

ACGIH TLV: 2 MG/M3 (BA)


FLUORSPAR

CAS: 14542-23-5

OSHA PEL 2.5 MG/M3 (MFR)

ACGIH TLV: 2.5 MG/M3 (MFR)


GRAPHITE, NATURAL; (GRAPHITE) (MAY CONTAIN INGS 6 & 7)

CAS: 7782-42-5

RTECS: MD9659600

OSHA PEL 15 MPPCF

ACGIH TLV: 2 MG/M3 RDUST


CRYSTALLINE SILICA

Fraction By Weight: 0-3.5%

OSHA PEL N/K

ACGIH TLV: N/K


SILICA, FUSED; (FUSED SILICA)

Fraction By Weight: 4-10%

OSHA PEL N/K

ACGIH TLV: N/K


COPPER (SARA 313) (CERCLA)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 1-5%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


SODIUM SILICATE

CAS: 1344-09-8

OSHA PEL N/K

ACGIH TLV: N/K


CANNOT BE CLASSIFIED SIMPLY. COMPOSITION &

RTECS: 9999999ZZ


PROCS & ELECTRODES/OTHER CONSUMABLES USED. DECOMP

RTECS: 9999999ZZ


VOLATILIZATION, RXN/OXIDATION OF INGS, PLUS THOSE OF

RTECS: 9999999ZZ


FLUORIDE CMPDS, METAL OXIDES, CARBON & SILICA.

RTECS: 9999999ZZ


GASES. FOR MORE SPECIFIC INFORMATION CONTACT NEHC .

RTECS: 9999999ZZ


THAT IS TOO DARK TO SEE WELD ZONE, THEN GO TO NEXT

RTECS: 9999999ZZ


HRS AFTER OVEREXP & MAY LAST 6-24 HRS. GEN

RTECS: 9999999ZZ


MILD PULM IRRIT & NONDISABLING SLIGHT FIBROSIS OF

RTECS: 9999999ZZ


BY INHAL, INGEST & EYE/SKIN CONT. ACUTE-IRRIT OF

RTECS: 9999999ZZ


PAIN, BLEEDING OF STOM, SHORTNESS OF BREATH, CONVLS,

RTECS: 9999999ZZ


CALCIFICATION OF BONES, LIGAMENTS OF RIBS, PELVIS &

RTECS: 9999999ZZ


OF MUC MEMBS & SILICOSIS. IRRIT OF EYES. SLIPPERY

RTECS: 9999999ZZ


CHEST, FEVER/ALLERGIC RXNS. LUNG

RTECS: 9999999ZZ


HARMFUL IF INHALED. SILICOSIS/SCARRING OF LUNGS

RTECS: 9999999ZZ


ACHING EYES, RHINITUS, FRONTAL HDCH, WHEEZING,

RTECS: 9999999ZZ


DISORDERS & DELETERIOUS EFTS ON HEART, CIRCULATORY

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:FUMES ASSOC W/HEATING, WELDING,
BRAZING, SOLDERING/CUTTING METALS CAN BE DANGEROUS TO YOUR HLTH &
OVEREXP CAN CAUSE LUNG DMG &/OR OTHER ORG DMG. ARC RAYS &
ULTRAVIOLET LIGHT CAN INJURE EYES & BURN SKI N. ELEC SHOCK CAN
KILL. DANGER! MAY BE HARMFUL/FATAL IF SWALLOWED. LUNG DMG CAN RSLT
FROM OVEREXP TO (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:IARC MONO ON EVAL OF CARCIN RISK
OF CHEMS TO MAN, VOL 49, PG 257, 1990:GRP 2B. NTP 7TH ANNUAL RPT ON
(SUPP DATA)
Effects of Overexposure:HLTH HAZ:GEN WELDING FUMES; DIZZ, NAUS OR
DRYNESS/IRRIT OF NOSE, THROAT/EYES. BRONCH ASTHMA, LUNG FIBROSIS,
PNEUMOCONIOSIS/SIDEROSIS. METAL FUME FEVER:SIMILAR TO FLU-LIKE
SYMPS; CHILLS, FEVER, HEAD & MUSCLE ACHE, TIGHTNESS OF CHEST,
DRYNESS OF MOUTH, MUSCULAR PAIN, NAUS & VOMIT. SYMPS USUALLY OCCUR
W/IN SEVERAL(ING 16)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PREEXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid

First Aid:INGEST:MOVE VICTIM TO FRESH AIR SOURCE. CONTACT MD & ADVISE
ON INGREDIENTS. SKIN:THOROUGHLY WASH HANDS OR AFFECTED AREAS W/SOAP
& WATER TO REMOVE ALL RESIDUE. IF RASH OR BURN DEVELOPS, CONSULT
MD. EYE S:THOROUGHLY FLUSH W/WATER FOR AT LEAST15 MINUTES TO REMOVE
ALL RESIDUE. OBTAIN PROMPT MED ADVISE. ADVISE MD OF INGREDIENTS.
INGEST:CALL MD &/OR LOCAL POISON CONTROL CENTER. ADVISE OF
INGREDIENTS.

Fire Fighting

Extinguishing Media:CO*2, DRY CHEMICAL FOAM TYPE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . TOXIC FUMES MAY BE PRODUCED.
Unusual Fire/Explosion Hazard:WELDING ARC, SPARKS & FLAMES CAN IGNITE
COMBUSTIBLES & FLAMMABLES. CANS, UNDER PRESSURE & FLAMMABLES MAY
EXPLODE. FOR MORE SPECIFIC INFO CONTACT NEHC .

Accidental Release

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE ADEQUATE VENTILATION TO KEEP BELOW
EXPOSURE LIMITS. KEEP FUMES & GASES FROM BREATHING ZONE-KEEP
WELDER'S HEAD OUT OF FUMES.
Other Precautions:TRAIN WELDER TO KEEP HIS/HER FACE AWAY FROM FUME/DUST
PLUME. TRAIN WORKERS NOT TO TOUCH LIVE ELECTRICAL PARTS & TO
INSULATE THEMSELVES FROM WORK & ELECTRICAL GROUND. FOR MORE
SPECIFIC INFORMATION CONT ACT NEHC .

Exposure Controls

Respiratory Protection:IF WORK STATION IS NOT PROPERLY VENTILATED TO
EXHAUST ALL FUMES, VAPORS & DUSTS BELOW RECOMMENDED EXPOSURE
LIMITS, USE A NIOSH APPROVED RESPIRATOR.
Ventilation:USE ENOUGH GEN VENT & LOC EXHST AT WORK SITE TO KEEP ALL
FUMES & DUST FROM WORKER'S BRTHG ZONE & THE GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS &(SUPDAT)
Other Protective Equipment:ANSI APPRVD EYE WASH FOUNTAIN & DELUGE
SHOWER . WEAR HAND, HEAD & BODY PROT WHICH HELP TO PVNT INJURY
FROM(SUPDAT)
Work Hygienic Practices:TO PREVENT CONTACT ALLERGIES, WASH HANDS &
CHANGE CLOTHES AFTER USE.
Supplemental Safety and Health
EXPLAN OF CARCIN:CARCINS, 1994:ANTIC TO BE CARCIN. ANIMAL:LUNGS. OTHER
PROT EQUIP:RADIA, SPKS & ELEC SHOCK. THIS MAY INCL ARM PROTECTORS,
APRONS, HATS & DARK PROT CLTHG. EYE PROT:FULL LGTH FSHLD (FP N )
W/APPROP FILTER LENS. PROVIDE PROT SCREENS & FLASH GOGGS IF NEC, TO
SHIELD OTHERS. AS A RULE, START W/SHADE (ING 15)

Chemical Properties

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FUMES, GASES & DUSTS GIVEN OFF DURING
HEATING, WELDING, BRAZING, SOLDERING, CUTTING/THERMAL SPRAY
PROCESSES (ING 10)

Disposal

Waste Disposal Methods:DISP OF WASTE MATL, POWDERS, GRINDING/FILTER
RESIDUES IN ENVIRONMENTALLY SENSITIVE MANNER I/A/W FED, STATE & LOC
REGS. USE APPROPRIATE MEASURES TO KEEP AIRBORNE DUST LEVELS
CONTAINED I/A/W EXPOS LEVEL S OF INGREDIENTS. SEE PROPER SAFE
HNDLG& STORAGE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.